GE Profile HGE6030DI Manual De Uso página 25

Insertion and
Assembly
Insert the oven into the opening of the furniture, resting it on the
base and pushing it as far as the ledge of the side stanchions
against the shoulder of the piece of furniture. For the dimensions
of the oven see furniture and technical data.
· Open the door and fix the
oven with four wood screws
to be screwed up through the
holes in the side stanchions of
the oven.
· Pay attention to fix the
oven in an absolutely firm
way, as above indicated,
and to insulate the electrical
elements in order to avoid an
eventual contact with metallic
parts .
· The sides and the base
surface where the oven is
to be installed should be
milled as shown in to allow
a safe air intake and a free
air circulation around the
oven, thus granting its good
operation and
damages to the furniture.
Moreover, the bonding agent joining the rolled sections to the
piece of furniture has to stand temperatures no lower than 90°C
to avoid deformations and coating disjunction. In case a plane is
inserted, the electrical connection of the plane and that of the oven
should be carried out separately, both for electrical reasons and to
facilitate the frontal extractibility of the oven.
Once the electrical connection has been carried out, apply
voltage to the oven only after installing it.
avoiding