GE Profile HGE6030DI Manual De Uso página 35

Use of Timer
Buzzer
Programming the
End of Cooking
Programming the
Duration and End
of Cooking
· The number set stops flashing and the countdown begins by
touching the symbol
· The remaining time is shown on the display.
· To stop the timer function earlier, touch the symbol
With this mode, you can automatically programme the duration
of the cooking. After defining the cooking function and the desired
temperature (as in the paragraph "Use without programming") before
confirming with the "start/stop" symbol, follow these instructions:
· Touch the symbol
flashes on the display
· Increase it or decrease it using the symbols "+" and "-" (max 199
minutes)
· Confirm touching the "start/stop" symbol
· The display shows the message "cook time" and the remaining
cooking time "end". Cooking begins; the display alternates showing
the temperature chosen and the time the cooking ends.
· When the cooking is completed, the oven sounds a buzzer and
the symbol
To zero the display, touch the "start/stop" symbol for 1 second. You
can stop the cooking before the programmed end by touching the
"start/stop" symbol.
With this mode, you can automatically programme both the du-
ration of the cooking and the time of the cooking ends. After de-
fining the cooking function and the desired temperature (as in the
paragraph "Use without programming") before confirming with the
"start/stop" symbol, follow these instructions:
Set the duration of cooking:
- Touch the symbol
on the display
- Increase it or decrease it using the symbols "+" and "-" (max 199
minutes)
- Confirm touching the symbol
or automatically after 20 seconds.
; the proposed number of 60 minutes
flashes.
; the proposed number of 60 minutes flashes
.
.
35