GE Profile HGE6030DI Manual De Uso página 29

Cleaning the
Oven Door
Disassembling of
the door glasses
Disassembling of the door
Set the oven door wide open.
Lift the hinge jumpers with
your thumb and index fingers,
then turn them fully outwards
to the end of stroke (Fig.A).
Turn the door towards the
closure position and lay it on
the jumpers: in this way the
hinge's spring is blocked.
A
ATTENTION: for your safety, before removing the glasses you should
remove the oven door.
To facilitate the cleaning, after having removed the door from the
oven, you can proceed with the disassembly of the glass. Release
the two upper blocks (picture C) so that the glass can be removed
(picture D). After the cleaning you should reassemble the glass,
replace the blocks and lock into position. Check that all components
have been assembled correctly and than you can re-assemble the
door onto the oven.
All the glasses used in this appliance has undergone a special safety
treatment. In the event of breakage, the glass shatters into small
square and smooth pieces which are not dangerous because they
are not sharp. Please never subject the glasses to thermal shock, for
example never clean the glass when it is hot.
By fully closing the door the
hinges
the connection slits which are
integral with the oven muffle
(sequence 1,2,3 of fig.B).
Re-assemble
carrying-out
operations in the opposite
order.
B
Please keep the OK symbol below on the right.
C
are unhooked
the door
the aforesaid
from
by
D
9