Freestyle Nomad Manual De Instrucciones página 11

All manuals and user guides at all-guides.com
mode (SET-ALTI), sea level pressure setting mode (SEA-
Lv) or units setting mode (UNITS).
3. Press S3 button once to enter into each setting mode.
Press S3 button again to return to the mode selection
screen.
4. In altitude setting mode, press S1/S2 button to set the
altitude digits.
5. In sea level pressure setting mode, press S1/S2 button to
set the sea level pressure digits.
6. In units setting mode, press S1/S2 button to toggle
between M (meter) and Ft (feet).
7. After finish making all the settings, press S4 button to
return to ALTIMETER mode.
NOTE: SET-ALTI means that you set an altitude reading
that is equal to current location altitude. Set the reference
altitude in a place where you know the altitude, for example:
with the help of a topographical map. SEA-Lv means that
you have to key in a sea level pressure. The sea level pres-
sure of your location can be found through information from
a weather station. If you don't know your current location
altitude or the correct sea level pressure, you can just set
the sea level pressure to 1013mbar/29.913inHg.
The watch has a factory setting that corresponds to the
standard air pressure (1013mbar/29.913inHg) at sea level.
NOTE: On the next day when you re-start your activity,
please calibrate the reference altitude again in order for the
altimeter to function properly.
12