Veridian Healthcare 09-349 Guía De Utilización

Non-Contact Infrared
Thermometer
09-349
Model
These brief instructions allow you to quickly begin using
your Non-Contact Digital Infrared Thermometer for Body
Temperature Measurements. Please refer to the
Instruction Manual for more detailed instructions covering
all features of the thermometer, including Object
Temperature measurements.
• The infrared technology used in this thermometer is safe
and is not harmful in any way. However, we recommend
avoiding looking into the lens during use.
Please refer to your Detailed Guidebook
for complete instructions regarding the many features of your
User Guide:
To measure body temperature using your Non-Contact Digital
Infrared Thermometer, follow these steps:
1. Press the POWER button to turn the thermometer
on. All symbols on the display will momentarily
appear, Fig. 1.
2. Ensure that the thermometer is in Person mode; the
Person symbol will be on the display, Fig 2. To
alternate between modes press and release the
Person/Object Mode button until you see the
desired measurement symbol on the display.
3. Press and hold the SCAN button. The Person
symbol, Scan in Progress symbol and "00" should be
displayed, Fig. 3.
4. While holding the SCAN button, aim the infrared
lens at the patient's forehead, holding the
thermometer approximately 1.5" – 2.5" away, Fig. 4.
5. Release the SCAN button. DO NOT MOVE THE
THERMOMETER; THE MEASUREMENT IS NOT YET
COMPLETE.
6. The thermometer will beep once, and the
temperature reading will be displayed, Fig. 5. If the
temperature measurement is below 100.4° F, a happy
face will be appear next to the reading. If the reading
is 100.4° F or above, a sad face will be displayed.
7. After about one minute after use, the thermometer
will automatically beep and shut off.
Infrared Digital Thermometer.
Please Note:
• Wait at least one minute between consecutive
readings to ensure accuracy.
• Attempting to take temperature readings from sites
on the body other than the forehead may produce
inaccurate results.
• The patient should remain still while the reading is
Fig. 1
being taken.
• If "Lo, " "Hi, " "Err, " or another error message appears,
see the Troubleshooting section of the manual for
instructions on how to resolve the problem.
Fig. 2
• Infrared forehead temperature readings are
equivalent to oral temperature readings.
• Readings taken while asleep should not be
compared directly to readings taken while awake,
as body temperature while asleep is typically lower.
Fig. 3
• Do not take body temperature readings within 30
minutes of being outdoors, exercising or bathing.
• Illness may be present even without an elevated
temperature, particularly in the elderly, in infants
Fig. 4
under 3 months of age, and those with
compromised immune systems. If illness is
apparent without a fever, consult with a healthcare
professional.
Fig. 5
#93-2020 12/12
©2012 Veridian Healthcare, LLC