Veridian Healthcare 09-349 Guia Del Usuario

Non-Contact
Infrared
Thermometer
09-349
Model
These brief instructions allow you to quickly begin using
your Non-Contact Digital Infrared Thermometer for Body
Temperature Measurements. Please refer to the
Instruction Manual for more detailed instructions covering
all features of the thermometer, including Object
Temperature measurements.
• The infrared technology used in this thermometer is safe
and is not harmful in any way. However, we recommend
avoiding looking into the lens during use.
Please refer to your Detailed Guidebook
for complete instructions regarding the many features of your
User Guide:
To measure body temperature using your Digital Infrared
Thermometer, follow these steps:
1. Press the Power button
on. The unit will run a self-test and all symbols on the
display will momentarily appear, Fig. 1.
2. Ensure that the thermometer is in Person mode; the
Person symbol will be on the display, Fig 2. To alternate
between modes press and release the Person/Object
Mode button until you see the desired measurement
symbol on the display.
3. Press and hold the MEASURE button. The Person
symbol, Scan in Progress symbol and "00" should be
displayed, Fig. 3.
4. While holding the MEASURE button, aim the infrared
lens at the patient's forehead, holding the
thermometer approximately 1.5" – 2.5" away, Fig. 4.
5. Release the MEASURE button, DO NOT MOVE THE
THERMOMETER; THE MEASUREMENT IS NOT YET
COMPLETE.
6. The thermometer will beep again, and the
temperature reading will be displayed, Fig. 5. If the
temperature measurement is below 100.4° F, a happy
face will be appear next to the reading. If the reading is
100.4° F or above, a sad face will be displayed.
7. After about one minute after use, the thermometer
will automatically beep and shut off.
Infrared Digital Thermometer.
to turn the thermometer
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Please Note:
• Wait at least one minute between consecutive readings
to ensure accuracy.
• Attempting to take temperature readings from sites on
the body other than the forehead may produce
inaccurate results.
• The patient should remain still while the reading is being
taken.
• If "Lo, " "Hi, " "Err, " or another error message appears, see the
Troubleshooting section of the manual for instructions on
how to resolve the problem.
• Infrared forehead temperature readings are equivalent to
oral temperature readings.
• Readings taken while asleep should not be compared
directly to readings taken while awake, as body
temperature while asleep is typically lower.
• Do not take body temperature readings within 30
minutes of being outdoors, exercising or bathing.
• Illness may be present even without an elevated
temperature, particularly in the elderly, in infants under 3
months of age, and those with compromised immune
systems. If illness is apparent without a fever, consult with
a healthcare professional.
#93-2020 05/15
©2015 Veridian Healthcare, LLC