Ringer Level; Ringer Tone; Setting Day/Time - GE 25880 Guia Del Usuario

Ringer Level

NOTE: This setting may only be made with the base.
1. Press the program/flash button until SET RING LEVEL shows in the
display. 1HI is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the caller ID (rev or skip) button to scroll to your selection.
3. Press program/flash again to store your selection.You will hear a
confirmation tone.
NOTE: If you turn the ringer OFF, RINGER OFF shows in the base display.

Ringer Tone

NOTE: This setting may be made with the base and the handset.
You may choose from three different ringer tones.
1. Press the program/flash button on base or flash/prog button on handset until
SET RINGERTONE or RINGERTONE shows on the display.The default
ringer tone is 1.
2. Use the touch-tone pad to select 1, 2, 3 on base or 1, 2, 3 on handset or
use the caller ID (rev or skip) button on the base unit or caller ID/vol (- or
+) button on the handset to scroll to your selection.The ringer tone plays
for few seconds.
3. Press the program/flash button on base or flash/prog button on handset
again to store your selection.You will hear a confirmation tone.

Setting Day/Time

NOTE: This setting may only be made with the base.
Time is transmitted automatically by your local phone company as part of
Caller ID service. If you are subscribed to Caller ID service, the current time is
set automatically when you receive your first CID call. Otherwise, you can set
the time manually. The day of week is not set automatically by Caller ID. The
day of week must be set manually through base.
1. Press the program/flash button until SET DAY shows in the display.
Monday is the default setting.
2. Use the caller ID (rev or skip) button to select the current day.
15