Venturi Saliva Ejector; High Power Vórtice Saliva Ejector; Vacuum Pump Adaptor (Optional); Way Syringe - Olsen INFINITY Guía De Operación

To adjust input pneumatic pressure: use the adjustment keys (13) to set the parameter.
Set minimum activation pressure
from 0.03 to 0.10 MPa
Note: the micromotor system preset by the factory according to the internal equipment pressure. It is not
recommended to change the pressure parameters.

- Venturi Saliva Ejector

Before starting the operation, fit the cannula to the 6.3 or 9,35 mm adapter
(3).
To activate the suction: remove the ejector (2) from the holder (1).
To deactivate the suction: place the ejector in its holder (1).
The cannula adapter (3) is removable for cleaning.
- High Power Vórtice Saliva Ejector
Before starting the operation, fit the cannula to the  6,3,  9,5 or
 11 mm adapter (3).
To enable/disable suction for Vórtice ejector (2): use the On/Off
Vórtice saliva ejector button (1) on the pedal.
The cannula adapter (3) is removable for cleaning.

- Vacuum Pump Adaptor (Optional)

Before starting the operation, fit the cannula to the  6,3,  9,5 or
 11 mm adapter (5).
To activate suction: remove the vacuum pump suction (2) from its
holder (1). The vacuum pump will work automatically.
To adjust suction flow: to decrease the suction flow, turn adaptor's
body (3) away from the indicators (4). The more distant, the smaller the
suction flow. For the maximum suction flow, align the indicators (4).
To deactivate the suction: place the vacuum pump in its holder (1).
The cannula adapter (5) is removable for cleaning.

- Way Syringe

Before beginning the use of the 3-way syringe (5), connect the syringe
tip (3) by pressing the locking ring (4) into the correct fit.
To emit air jet: press the air button (1).
To emit water jet: press the water button (2).
To emit spray jet: press simultaneously the air (1) and water (2)
buttons.
Set maximum input pressure
from 0.20 to 0.40 MPa
18