Laguage; Cardiac Monitor (Optional); Thermo Comfort (Optional); Air Jet (Optional) - Olsen INFINITY Guía De Operación

7.1.4 –Laguage
To change the language: press Adjust/Enter (3) for 3 seconds to access
the "SETUP" screen. Use the arrows (1 e 2) to select the option 3. LANGUAGE.
To select the language: press Adjust/Enter (3) to access "SET LANGUAGE"
screen. Use the arrows (1 e 2) to select the wish language.
To save the alteration: press Adjust/Enter (3) for 3 seconds.
To cancel and return: press Reset/Esc (4).
The options in the "AJUSTE" screen may change if the cardiac monitor
(optional) is available on the device. (section 6.11.4).

7.1.5 Cardiac Monitor (Optional)

To activate the cardiac monitor: identify the input connection (7) identified
with the icon (5) and connect the plug (6). Attach the sensor (8) to the tip of any
of the patient's fingers.
The patient's cardiac monitoring will automatically appear in the lower left
corner of the display after 8 seconds.
To shown only the cardiac monitor on the display: press the Adjust/Enter
key (3) for 3 seconds to access the "AJUSTE" screen. Use the adjustment keys
(1 and 2) to select option "4. BATIMENTO".
To access the "BEAT" screen: press the Adjust/Enter key (3).
To return to the previous screen: press the Reset/Esc key (4).

- Thermo Comfort (Optional)

To activate/deactivate the Thermo Comfort system: use
the Thermo Comfort On/Off key (1) on the worktable.
To access the Thermo Comfort screen: press the Adjust/Enter key (3) for
3 seconds to access the "AJUSTE" screen. Use the adjustment keys (1 and 2) to
select the "3. THERMO COMFORT" option.
To adjust the water temperature: press the Adjust/Enter key (3) to access
the "AJUSTE TEMPERATURA" screen. Use the adjustment
2) to change the temperature. Press the Adjust/Enter key (3) to save.
To cancel and return to the previous screen: press the Reset/Esc
(4).

- Air Jet (Optional)

To activate/deactivate the Air Jet system: use the On/Off Air Jet key (1) on the
command panel. When Air Jet system is activated, the continuous air jet starts as soon as the
handpiece is removed from the holder.
When pressing the propulsion/activation pedal (2), the system is interrupted, and the
handpiece operates normally. When releasing the propulsion/activation pedal (2), the air jet
will restart until the system is turned Off or the handpiece is placed in its holder.
keys (1 and
key
21