Descargar Imprimir esta página

FE VKN Serie Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Thank you for purchasing our Coolant Pump.
We are proud of the quality and ease in handling as its primary features, the coolant pump is extremely
sturdy and simple in construction, both mechanically and electrically. In order to avoid unexpected
problems caused by mishandling, and to obtain top operating performance from the pump, we
recommend that this instruction manual be read carefully and used as a constant reference as a
guarantee of maximum efficiency.
ACCEPTANCE CHECKS -------------------------------------------------
Before installation, check the coolant pump for the following.
1) Check to see if the product you received is the one you ordered.
(PUMP TYPE, OUTPUT, VOLTAGE, FREQUENCY, etc.)
2) See if any portion has been damaged during transportion.
If any defective points are defected, contact your dealer.
SPECIFICATIONS ----------------------------------------------------------
Refer pump HEAD, QUANTITY, FREQUENCY, VOLTAGE and CURRENT to the nameplate.
Another specifications are as follows.
1) FLUID USED
Coolant pump is designed to use for cutting oil. Don't use water and special fluid
such as printing fluid, acid fluid, etc.
2) VISCOSITY OF FLUIDS USED
As viscosity of the fluid used in the pump increases the work load carried by the
motor rises. The motor will labor under an excessive load when viscosity of the
fluid in the pump rises beyond the viscosity range shown below. Use of fluid with
viscosity exceeding these specifications will shorten the overall operating life of
the pump or even cause the pump motor to burnout. The viscosity range of fluid
appropriate for a pump is determined by the rated output of the motor, and motor
output varies depending on its type and frequency.
See the table
Note:
The unit used to designate viscosity is the No.1 Red wood second.
Since fluid viscosity dependents on the ambient temperature, always check fluid
viscosity with the lowest possible temperature.
INSTRUCTION
Frequency
VKP043L to 113A
VKN035L to 115A
VKN043A(L) to 113A
VKP045A(L) to 115A
VKP075T to 095T
VKN,VKP055H to 095H
VKS Series
( Without VKS123AB
VKS152AC )
VKS123 AB ・152 AC
VKR Series
- 2 -
50 Hz
60 Hz
800
1200
1200
150
300
600
32
300
600
300
150
300
500
32

Publicidad

loading