Clarke FOCUS S28 Manual Del Operador página 27

MAINTENANCE
Adjusting Squeegee Blades
When properly installed the front blade should be
approximately .12 above the rear blade. See fi gure #29.
WARNING!
Maintenance and repairs must be done by authorized
personnel only.
WARNING!
Electrical repairs must be done by authorized personnel only.
Consult your Clarke Authorized Service Person to do the
service procedures.
Use only genuine Clarke parts.
How to Clean the Solution Line
If the solution line becomes clogged, pull the fi lter assembly
out from behind the brush housing (Figure 30). Turn solution
vavle off. Remove the fi lter screen (Figure 31, B) and clean
or replace it. Turn solution valve back on (fi gure 31, A) and
push fi lter assembly back inside frame.
Clarke
®
Operator's Manual (EN) - FOCUS S28/L28/S33/L33/S38/L38 WB
ENGLISH
0.12" (3.0 mm)
Figure #29
Figure #30
A
Figure #31
Form No. 70851A - 27 -
EN
B