Sagola XTech 100 Manual De Instrucciones página 28

5. Depress the trigger, then reinstall the needle gently into the airbrush until you feel a positive
stop.
6. Tighten the needle locknut.
7. Screw the handle onto the airbrush body.
DO NOT over-lube the needle; transferring excess lube into the nozzle may
cause severe paint flow problems.
DO NOT use light machine oil or WD-40 for lubrication. These lubes cause the
needle to stick when it moves through the needle packing and can also get into
the air system.
ENGLISH