3.2
STORAGE AND OPERATING CONDITIONS
3.2.1
Storage conditions:
Temperature: -40°C to +70°C
Humidity: 20 % to 96 %
Altitude: < 12,000 m
3.2.2
Operating conditions:
Temperature: 0°C to 40°C
Humidity: 20 % to 80 %
Altitude: < 2,000 m
Pollution level: 2
Rated voltage: 150 V CAT II relative to earth
3.3
CLEANING, MAINTENANCE, WARANTY
3.3.1
Cleaning
Disconnect from all sources of electricity before cleaning,
maintenance or dismantling.
Clean using a soft tissue with a small amount of soap and
water, then dry completely.
3.3.2
Maintenance, metrology:
After a long period of storage, it may be worth turning each of
the decade's switches before use.
Like all measuring or testing devices, regular metrological
verification is necessary.
To have your devices checked and calibrated, please contact
our Cofrac approved metrology laboratories or Manumesure
centres.
4
4.1
WARRANTY
This instrument is guaranteed against any defect in materials or
workmanship, in accordance with the general terms and
conditions of sale.
During the guarantee period (1 year), the instrument must be
repaired only by the manufacturer, who reserves the right to
repair the instrument or to exchange all or part of it.
The guarantee is not applicable in the following cases:
1.
misuse of the instrument or use with incompatible
equipment;
2.
modifications
authorisation
department;
3.
work carried out on the instrument by a person not
approved by the manufacturer;
4.
adaptation for a specific application, not included in the
definition of the instrument or the operating instructions;
5.
impacts, falls or immersion.
BR04-05-06-07 – BC05 – BL07
WARANTY, REPAIRS
of
the
instrument
of
the
manufacturer's
without
explicit
engineering
17