Sum and subtraction of surfaces
Fig. 1
Step 1 - Measure the first surface as shown in Fig.1
Step 2 - Briefly press
and repeat the measuring process to
obtain a second surface Fig. 2
Step 3 - Press briefly
, the device calculates the sum of the
areas as shown in Fig. 3
The subtraction functions are similar to addition, using
Sum and subtraction of volume
Fig. 4
Fig. 2
Fig. 3
Fig. 5
Fig. 6
Step 1 - Measure the first volume as shown in Fig.4
Step 2 – Shortly press
the second volume
Step 3 - Shortly press
volumes as shown in Fig.6
The subtraction functions are similar to addition by using the
key.
TILT MEASUREMENT
Short press
.
Press
to exit.
ELECTRONIC SEARCHER (CAMERA MODE - ZOOM)
If the user can not find the laser spot under a bright light
source, he can turn on the camera for easier measurement.
1. Set the device to measure linearly and then press
to turn on the camera.
and repeat the measurement to get
, the unit calculates the sum of the
, the screen shows:
X-axis tilt
Y-axis tilt
briefly
25