swissflex uni 14 75RF bridge basic Modo De Empleo página 15

Problem Possible cause
Remote control No mains supply.
or control
Manual switch or control system
system not
defective.
working.
Switched capacitor or mains isola-
tion blank.
Control sys- Thermoswitch on the transformer
tems suddenly may have been triggered or may be
no longer travel defective.
/ move.
Thermal cut-out in the transformer
may have been triggered or may be
defective.
Internal fuse may have been trigge-
red or may be defective.
No mains supply.
Supply line (mains and / or manual
switch / auxiliary control system)
interrupted.
The battery- Block battery / block batteries flat.
operated
electric reset
Block battery/batteries not con-
function cannot
nected.
be activated.
GB
Solution
Restore mains connection.
Contact your supplier / stockist.
Press the button on the mains isolation plug.
Leave the control system in the rest position for
20-30 minutes.
Contact your supplier / stockist.
Contact your supplier / stockist.
Restore mains connection.
Check the supply line and restore contact if
applicable.
Check and replace the block battery / block batte-
ries if necessary.
Connect the block battery / block batteries.
Operating instructions
15