General Information; Presentation Of Installation; Welding Set Constituent; Technical Specifications - Air Liquide DV YARD Manual Del Usuario

EN

1 - GENERAL INFORMATION

1.1 - PRESENTATION OF INSTALLATION

The DV YARD can be adapted to most direct current ARC ( MMA )
power-sources , you must use it with 300 mm wire spool.
Its power supply is ensured directly by the arc voltage. It is
therefore very simple to implement and does not require any
auxiliary transformer.
Using the DV YARD, you can transform your ARC ( MMA ) power-
source into an authentic MIG-MAG welding source.
Air Liquide Welding recommend to use with CV power source for
best welding performances
When properly installed, the DV YARD will enable you to obtain
high-quality welds with a good visual appearance.
Optimum use of the system requires full knowledge of this manual;
it is important to follow all the instructions described in this
document.

1.2 - WELDING SET CONSTITUENT

The welding-set is comprise of:
a wire feeder unit, with 5 m long earth cable and its clamp & 5 m
■
long gas hose,
user and maintenance manual,
■
safety instruction.
■

1.3 - TECHNICAL SPECIFICATIONS

- W000382134 : DV YARD : wire feeder without flowmeter
- W000382135 : DV YARD FM : wire feeder with flowmeter
Rollers plate
Input voltage range
Welding current range
Duty cycle 60% at 40 °C
Duty cycle 100% at 40 °C
Wire dia. usable
Max. spool size spool capacity
Wire feed speed
Designed to fit through a manhole
Protection index
Standard
Torch connection
GENERAL INFORMATION
DV YARD
W000382134
DV YARD FM
W000382135
4 rollers
14-48 VDC 15-110 OCV
50 – 425 A
425 A
330 A
0.8 to 2.4 mm
300 mm 15/20 kg
1.2 -20 m / min
Yes
IP 23 S*
EN 60974 - 5 / EN 60974 - 10
"European type"
*Protection index
Code letter
First number
Second number

1.4 - DIMENSIONS AND WEIGHT

Wire feeder unit DV YARD
4 - EN
IP Equipment protection
2 Against the penetration of solid
foreign bodies
with Ø ≥ 12,5 mm
1 Against the penetration of vertical
drops of water with harmful effects.
3 Against the penetration of rain
(inclined up to 60° in relation to the
vertical) with harmful effects.
S Indicates that the protection test
against detrimental effects due to
water penetration has been done with
all parts of the equipment at rest.
Dimensions Net weight
(LxWxH)
600 x 220 x 420 mm 13.9 kg