Cequent Performance Products 65070 Instrucciones De Instalación página 4

1. Remove lower air dam by removing 11 fasteners with 10mm socket and
return to owner.
3. Pull back inner splash guard by temporarily removing the fasteners holding
it to the bumper fascia, to allow access for bolting the hitch side bracket in
place.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
2. Remove tow loop (if present) by removing the M12 bolts with a 17mm
socket.
4. Trim the lower portion of the splash guard as needed to allow for hitch side
bracket, figure 4.
Sheet 4 of 18 65070NP 2-8-16 Rev. C