Flexible Area; Important - EAS ELECTRIC EMIH600-FX1 Manual De Instrucciones

Touching the keep warm control
this means choosing the heating level for warming up
" ",
and keeping 42° C with
Touching the keep warm control
this means choosing the heating level for
show " " ,
warming up and keeping 74° C with
If the zone is already hot（letter "H" visible on
display） ,you can also use this heating lever for keeping
warm of 74° C with
Touching the keep warm control
zone indicator show "
heating level for keeping 94° C with
.
finishing cooking
Touching the heating zone selection control that you wish to
cancel the keep warm function
Touching the slider control, then the cooking zone will revert to
the level you select.
Note：
• This function may be used on all cooking zones at the same time.
• Be sure to use a lid, as this could affect the final result.
• Better not use cast iron cookware.

3.4.5 Flexible Area

• This area can be used as a single zone or as two different zones, accordingly to the cooking needs
anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working as
a single zone, a cookware is moved from one zone to the other one within the flexible area keeping the
same power level of the zone where the cookware originally was placed, and the part that is not covered
by cookware is automatically switched off.
Important：
• Make sure to place the cookwares centered on the single cooking zone. In case of big
pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone
covering both cross.
Examples of good pot placement and bad pot placement.
,the zone indicator show
.
2L of water
again
,the zone indicator
2L of water
2L of water after finishing cooking.
for the third time
this means choosing the
" ,
2L of water after
Cancel the keep warm function
.
, the
13
1 time 2 times 3 times
V.2