Connector And Controls; Label On The Bottom Of Unit; Manufacturer's Identification Data; Meaning Of Graphics Symbols - Carlo De Giorgi SURGERY PLUS Manual De Instrucciones

CONNECTOR AND CONTROLS
Label on the bottom of unit
The requirements for the safety of H.F. surgical equipment ask data and graphic symbols
must be printed on the cabinet or on at least one of the panels of generator unit to define
its features and oversee its condition of work.
Manufacturer's Identification Data
SURGERY PLUS HF electrosurgical unit are designed, manufactured and tested by the
LED SpA in its own laboratories in Aprilia (LT) – Italy.
Meaning of Graphics Symbols
The meaning of the graphic symbols printed on SURGERY PLUS's cabinet is the fol-
lowing:
1- Floating Patient's plate: neither at low-frequency nor at high frequency earth con-
nected.
EN 2- The equipment is CF class, protected against Cardiac Defibrillator discharge.
3- Not Ionizing Radiation emitted.
4- Consult instructions for use
5- Corresponding to the Directive Medical Device 93/42/EC
6- The product mustn't be threw in the containers for urban wastes but it must be swal-
lowed by a separate picking.
7- Manufacturer
8- Serial number
1
Frontal Panel
1 Level control
2 Level indications
3 Selection key and light for CUT function
4 Selection key and light for CUT 1 function
5 Selection key and light for CUT 2 function
6 Selection key and light for COAG function
7 Connector for neutral electrode connection
8 Handle connector for active electrode-holder
9 Foot-switch connector
EN 14
2 3 4 5 6 7
MA505a_IT-EN-ES-FR-DE
8