Installation; Power Led - DART Controls 65E Serie Manual De Instrucciones

7.300" 5.500"
.900"
Caution: Do not mount controller where ambient temperature is outside the range of -30°C (-22°F) to 60°C (140°F)
for Chassis model; -15°C (5°F) to 60°C (140°F) for Enclosed model.
Before attempting to wire the control, make sure all power is disconnected. Recheck code designation to assure proper voltage
is present for the control. Caution should be used in selecting proper size of hook-up wire for current and voltage drop.
CURRENT LIMIT
TRIP OUTPUT
LED
The suggested female wire connector for the .110" male spade terminal is a Molex Inc. part number 1090030024.
65E10C/20C MOUNTING
.312"
5.125"
5.530"
TOP VIEW

INSTALLATION

CURRENT LIMIT
TRIP OUTPUT
48V
36V
24V
12V
VOLTAGE
SELECTOR
3
.219"
4.264"
3.845"

POWER LED

4.782"
.875"
2.780"
SIDE VIEW
P2
-5
-4
-3
-2
-1
-4
-3