Orascoptic XV1 Modo De Empleo página 11

IEC 60601-1-2:2007 Table 1 – Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The XV1 is intended for use in the electromagnetic environment specified below. The customer or user of the XV1
should assure that it is used in such an environment
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions IEC 61000-3-2
Voltage fluctuations/flicker emissions
IEC 61000-3-3
IEC 60601-1-2:2007 Table 2 – Guidance and Manufacturer's Declaration – Electromagnetic Immunity
The XV1 is intended for use in the electromagnetic environment specified below. The customer or user of the XV1
should assure that it is used in such an environment
Immunity test
Electrostatic discharge (ESD)
IEC 61000-4-2
Power frequency (50/60 Hz)
magnetic field
IEC 61000-4-8
Orascoptic XV1—Instructions for Use
Compliance
Group 1
Class B
Not applicable
Not applicable
IEC 60601 test
level
± 6 kV contact
± 8 kV air
3 A/m
U.S. Technical Support: 800-369-3698
Outside the U.S.—Call Your Local Distributor
Electromagnetic environment – guidance
The XV1 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference with nearby electronic
equipment.
XV1 is suitable for use in all establishments other
than domestic and those directly connected to
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Compliance level Electromagnetic environment – guidance
± 6 kV contact Floors should be wood, concrete or
± 8 kV air ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
3 A/m Power frequency of magnetic fields
should be at levels characteristic
of a typical commercial or hospital
environment.
Page 11