Ecoflam MAXFLAM D 10 Manual Del Usuario página 18

420010404000 Maxflam D 10-20
EN
069 :
Revision number
P : by-pass plug installed in return port
TECHNICAL DATA
General
Mounting
Connection threads
Inlet and return
Nozzle outlet
Pressure gauge port
Vacuum gauge port
Valve function
Filter
Shaft
By-pass plug
Weight
Hydraulic data
Nozzle pressure range
Delivery pressure setting
Operating viscosity
Oil temperature
I nlet pressure
Return pressure
Rated speed
Torque (to 40 gpm)
Choice of heater
Crtridge
Fitting
Rating
PUMP SUNTEC E TECHNICAL DATA
PUMP
IDENTIFICATION
(Not all model combinations are available
Consult your Suntec representative)
)
Pressure regulation
Gear set capacity
(see pump capacity curves)
Filter
Shaft rotation
and nozzle location
(seen from shaft end)
(vista lato albero)
A : clockwise rotation/
right hand nozzle.
C: anti clockwise rotation/
left hand nozzle. izquierdo
E 4 N C 1 069 7 P
Flange mounting
body with
preheater cavity
model without cut-off function
Installation
for two-pipe operation
Flange mounting according to EN 225.
Cylindrical according to ISO 228/1
G 1/2"
G 1/4"
G 1/8"
G 1/2"
Pressure regulating - no cut-off
Open area: 45 cm
²
Opening size
Ø 11mm according to EN 225.
Inserted in return port for 2 pipe system
to be removed with a 3/16" Allen key
for 1 pipe system .
4 kg
14 - 30 bar
20 bar
3 - 75 cSt
0 - 130°C max. nella pompa
installation to light oil :
vacuum to prevent air separation from oil.
installation to heavy oil : 3,5 bar m
installation to light oil : 3,5 bar max.
installation to heavy oil : 3,5 bar max.
3600 gpm max.
0,3 N.m
Ø 12 mm
in accordo con EN 50262
50-80 W
Oil under suction
Inlet
Oil under pressure
By-passed oil
returned to tank,
or to suction
Tenuta
TWO PIPE
albero
INSTALLATION
adjustment
ONE PIPE
INSTALLATION
Capacity (L/h)
Capacity (L/h)
;
Viscosity
0,45 bars max.
a x.
- 18 -
Vacuum
gauge port
Gear set
By-pass hole
To nozzle
Pressure
Pressure
By-pass
gauge port
plug
inserted
Back Return
to suction
By-pass
plug
removed
Return
plugged
Pump capacity
Pressure (bar)
Pressure (bar)
= 200 cSt
20 cSt
Rated speed gpm
5 cS
= 2850
Data shown take into account a wear margin.
Do not oversize the pump when selecting the
gear capacity.