Descargar Imprimir esta página

BH FITNESS H8705 Manual Del Usuario página 49

Ocultar thumbs Ver también para H8705:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
TELEMETRIC HEART-RATE MEASUREMENT.-
Insert plug (D) into soket(H) located on the electronic monitor (P). Thenput then
chest sensor (E) on
USE OF THE CHEST BAND.-
(Pulse sensor)
The
chest
band
transmits the pulse rate by contact
with the chest and sends signal to the
display clock.
PRECAUTION. Before beginning any
exercise program, you should consult
to your doctor and tell him about the
intensity of the exercise. If you use a
pacemaker do not use the band until
you have consulted with your doctor.
ASSEMBLY AND USE OF THE
CHEST BAND.-
The
key
to
measurement is putting the transmitter
on correctly as described below.
1. Attach the chest transmitter (E) to
the elastic belt (F).
2. Adjust the strap (F) to fit tightly and
comfortable.
MEASURE THE HEART RATE.-
(optional
flawless
heart
English
3. Secure the strap (F) around your
chest, below the breasts and lock the
buckle.
extra)
Without detaching the elastic strip (F),
pull the transmitter away from your
body exposing the two grooved areas
that are located on the inside of the
transmitter.
4. Wet the grooved electrode areas
with saliva, contact lens solution or
any other saline solution. Return to its
original position against your skin with
the Polar text in a central up-right
position.
5. After wetting the electrodes, do not
slide the transmitter around on your
rate
body as this has the effect of drying
the electrodes.
It
is
transmitter against bare skin to ensure
successful operation. If a transmitter is
worn over a shirt, the shirt has to be
well wetted under the electrode area
49
recommend
to
wear
the

Publicidad

loading