Installation; Attaching The Terminal - Mettler Toledo XPR26PC Manual De Usuario

1 Tweezers
Weighing pan, small
2

4.4 Installation

4.4.1 Attaching the terminal

NOTICE
Damage to the cables due to careless handling
Do not kink or twist the cables.
1 Insert the slides of the display holder (1) into the front of
the weighing unit (2).
2 Connect the terminal cable (3) with the terminal (4).
Consider the pin assignment.
3 Place the terminal (5) onto the terminal holder (6).
Pipette Calibration Balances
3 Weighing pan, large, with cover ring and draft
shield
2
1
4
3
5
6
11