Fanimation The Jennix FPD7943 Serie Manual Del Propietário página 11

How to Assemble the Blades and Light Kit (continued)
5. Install included minican bulb into the socket.
(Figure 5A)
5-1. Don't install the light bulbs if you want to install
the lower steel cap in Step 6-1. (Figure 5B)
CAUTION
To reduce the risk of fire, use 100-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off
the wall switch and allow the bulb to cool for 10
minutes before relamping.
Bulb is pressurized and may shatter. DO NOT
TOUCH BULB WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove fingerprints
with alcohol prior to use.
6. Secure the glass to the light plate assembly
by twisting in a clockwise direction.
Do not over-tighten. (Figure 6A)
Assemble the lower steel cap to the adapter plate
6-1.
assembly by twisting in a clockwise direction.
(Figure 6B)
100-WATT
Minican
Light Bulb
SOCKET PLATE
ASSEMBLY
Figure 5A
Figure 6A
11
Figure 5B
LOWER STEEL
CAP ASSEMBLY
GLASS
Figure 6B