Tools Needed For Assembly; Unpacking Instructions - Fanimation The Jennix FPD7943 Serie Manual Del Propietário

This manual is designed to make it as easy as possible for you to assemble,

Tools Needed for Assembly

• One Phillips head screwdriver
• One stepladder
• Three wire connectors (supplied)
WARNING
!
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 8). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
WARNING
!
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any
accessories designated specifically for use with this
product by Fanimation. Substitution of parts or
accessories not designated for use with this product
by Fanimation could result in personal injury or
property damage. Contact your retail store for
missing or damaged parts.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to
exploded view illustration.
Hanger Bracket
Assembly
W/Screws
Downrod/
Hanger Ball
Assembly
Ceiling Canopy
Canopy
Screw Cover
install, operate and maintain your ceiling fan
• One wire stripper
• One 1/4" blade
screwdriver

Unpacking Instructions

Motor Coupling Cover
Assembly
Fan Motor Assembly
Blade Set
Materials
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would be a
3-conductor (2-wire with ground) of the following size:
Installed Wire Length
Up to 50 ft.
50-100 ft.
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
an otor Assembly
anger racket Assembly with
screws
ownrod/ anger all Assembly
Ceiling Canopy
Canopy Screw Cover Assembly
otor Coupling Cover Assembly
lade Set
Light Plate Assembly
Socket Plate Assembly
Glass
Lower Steel Cap Assembly
T 2 and-held emote
ulb
Light Plate Assembly
Socket Plate Assembly
Lower Steel Cap Assembly
Glass
4
Wire Size A.W.G
14
12
ardware bags:
– 1/4"-20 x 14mm (blade to motor)
Pan ead Screw
– Phillips Screwdriver, 4"
– our Wire Connectors
– ag Assembly Safety Cable
Minican Bulb
100W
TR29 Hand-held
Remote
Hardware Bags