Festo CPX-4AE-P Manual Del Usuario página 9

1 User
The CPX pressure sensor module is only intended for use
in CPX terminals.
The maximum values specified in the section Technical
specifications" must be observed during operation.
Detailed information can be found in the manual for the
CPX analogue IO modules (P.BE−CPX−AX−...) and in the
CPX system manual (P.BE−CPX−SYS−...).
Warning
S Switch off the following equipment before
undertaking installation and/or maintenance work:
S Connect an earth conductor with sufficient
cross−sectional area to the connection on the CPX
terminal marked with the earth symbol.
S The I/O modules contain electrostatically sensitive
components. Therefore, do not touch any
components. Observe the handling instructions for
electrostatically sensitive components.
Note
Only commission a CPX terminal which has been
completely assembled and wired.
The pressure sensor module does not have a separate
electrical connection block. Information about installing a
CPX terminal can be found in the CPX system manual.
Festo CPX−4AE−P 0906NH English
instructionsEnglish
compressed air supply
operating and load voltage supplies.
9