Install The Hood - Best K3139 Manual Del Usuario

PREPARE THE HOOD
NON - DUCTED CONFIGURATION, cont'd.
7. Carefully place the lower decorative flue
into the recessed area of the range hood
top. Fig. 6.
8. Carefully slide the upper decorative flue
down inside the lower flue.
Note: air vents must be up. Fig. 6.
9. Secure the recirculation plenum to the
upper flue with (4) flat head screws.
Fig. 8.
INSTALL THE
HOOD
Note: at least two people
will be required to mount
the hood.
1. Raise the hood into its
mounting position.
2. Plug the power cord into
the electric
receptacle.
excess cord behind the
flue.
3. Align the rectangular opening on the back
of the hood with the wall-mounting bracket.
Gently lower the hood until it securely
engages the bracket. Fig. 9.
4. Level the hood and secure with (4) mounting
screws. Use drywall anchors provided if
wall studs or framing are not available. Fig.
9.
5. Raise the upper flue until its holes align
with holes in the flue mounting bracket
(located on ceiling). Fig. 10.
6. Secure the flue with (2) mounting screws.
Fig. 10.
MOUNTING
(4.8x38mm)
MOUNTING
SCREWS
(4.8x38mm)
wall
Tuck
- 10 -
SCREWS
MOUNTING SCREWS
PLENUM
4 FLAT
HEAD
SCREWS
UPPER
FLUE
FIG. 8
WALL FRAMING
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
FIG. 9
3.9x9.5mm
FIG.10