Operator And Equipment Safety - Millipore NovaSeal NM0029 Manual Del Usuario

10

Operator and Equipment Safety

Any attempt to use the tool in a manner not specified by Millipore
Corporation may result in damage to the tool, voiding of product
warranty, and possible operator injury.
All operators of the tool must read and understand this User
and Maintenance Guide before using this tool. Failure to follow
operating instructions could result in operator injury, improper
crimp or damage to the tool.
Prior to operation, the tool must be fully assembled as shown in
this guide.
Use appropriate personal protective equipment and eye
protection when operating the tool.
DO NOT expose the tool to liquid spray or immerse the tool in
any liquid.
DO NOT autoclave or steam the tool.
DO NOT use without a properly installed die.
DO NOT place the battery where it may come in contact with
conductive materials.
Electric engine may cause sparks. Do not use near flammable
liquids or gasses.
Do not insert fingers into tool, pinching may occur.
www.millipore.com