Assembling The Crimping Tool - Millipore NovaSeal NM0029 Manual Del Usuario

14

Assembling the Crimping Tool

DO NOT install the battery on the Crimping Tool until the
Crimping Tool is fully assembled.
Pinching may occur.
1. Push the locking pin toward the
tool (A), turn it counter-clockwise
(B), then pull the locking pin out
and hold (C).
B
2. Insert the jaws into the Crimping
Tool.
A
C
3. Push the locking pin in until it
locks the jaws. A "click" will be
heard. Once the jaws are installed
they cannot be removed.
www.millipore.com