Troubleshooting - Millipore NovaSeal NM0029 Manual Del Usuario

NovaSeal Battery Powered Crimping Tool User Guide

Troubleshooting

In most instances, the suggested actions/resolutions should resolve the problem.
If the problem persists or is not included in this list, contact Millipore Technical
Service.
Problem
Crimp pressure is low
Tool leaks oil
Rough edge on cut
Tool LED remains lit
for 20 seconds after
crimp
Tool LED flashes for
20 seconds after crimp
Tool remains lit for 20
seconds then flashes
intermittently
Battery charger flashes
green and red
Possible Causes
Service required
Service required
Worn die
Battery discharged
Service required
Battery discharged,
service required
Defective battery.
Remedy
Return to Millipore
Return to Millipore
Replace die
Recharge battery
Return to Millipore
Return to Millipore
Replace battery.
23