Charging The Battery - Millipore NovaSeal NM0029 Manual Del Usuario

12

Charging the Battery

1. Inspect the battery charger before using to insure there are no foreign objects
in it. Plug the battery charger into an appropriate power receptacle.
2. Remove the battery from the tool.
1
3. Place the battery into the battery charger. Allow the battery to charge for ap-
proximately 60 minutes. The green LED will illuminate when the battery is
fully charged. Two or three charging cycles may be required before a new bat-
tery is fully charged.
4. The battery should be recharged after 50 crimping cycles.
2
www.millipore.com