Specifications - Inficon D-Tek 3 Instrucciones De Operación

3 | Specifications

3 Specifications
1
allow D-TEK 3 to run for 15 minutes prior to use.
2
recommended before use in low temperature environments.
6 / 357
Usage
Sensor type
Compatible refrigerants
• Refrigerant sensor
(standard, PN 724-701-G1)
• CO sensor (PN 724-701-G2)
2
• Flammable refrigerant (HC) sensor
(PN 724-701-G3)
Minimum sensitivity (Pinpoint mode,
Super sensitivity)
Battery type
Charging input type
Charging time (starting at 0%)
Battery life
Input voltage
Input current
Warm-up period
Temperature ranges and humidity
• Storage
2
• Operating
• Charging
• Humidity
Altitude
Pollution degree
Overvoltage category
Weight (with battery; not including
carrying case or accessories)
To achieve optimal performance and the specified sensitivities, it is recommended to
Use in temperatures below 0°C (32°F) should be limited. Extended warm-up time is
indoor/outdoor
infrared
All CFCs, HCFCs, HFCs, HFOs, and
blends (including A2Ls)
R744 (carbon dioxide)
R290, R600a, R441a (see safety
warnings)
1
0.03 oz/yr (1 g/yr)
lithium ion
micro USB
approximately 3 hours
approximately 9 hours
5 V (dc) ±5%
1 A ±5%
45–90 seconds
-20–60°C (-4–140°F)
-20–50°C (-4–122°F)
0–45°C (32–113°F)
95% RH NC maximum
2000 m (6500 ft.)
2
2
0.97 lb. (0.44 kg)
074-710-P16A D-TEK 3 Operating Manual
INFICON