Commissioning; Connection And Starting; Remove Shipping Restraint - Renfert Dynamix®speed 2 Manual De Instrucciones

3.3 Standard Delivery
1 Dynamix ® speed 2 mixing unit
en
1 Power cord
1 Operating instructions
3.4 Accessories
25 6200 0100 Wall mounting kit
4

Commissioning

4.1 Setup
The equipment can be used as a benchtop unit, although it is also suitable for wall mounting�
4.1.1 Benchtop Unit
Select a stable underlay on which to set the unit up�
4.1.2 Wall Mounting
With the aid of the wall mounting kit (refer to the accessories), the unit can be securely mounted on a
wall� The mounting instructions are included in the mounting kit�
4.1.3 Setup Recommendations
Operate the unit at room temperature 18 - 24 ºC [64 – 75 ºF]�
When setting up the unit, please note the following:
• Do not place the unit under a heat source�
• Do not place the unit in front of open windows�
• Do not set the unit up where it will be subjected to direct sunlight�
• Do not expose the unit to high humidity�
4.2

Connection and Starting

The equipment may only be operated if the information on
the rating plate conforms to the specifications of your local
mains power supply.
⇒ Connect the provided power cord (19, Fig� 1) to the mains con-
nection socket (18)�
⇒ Plug the power cord into the wall outlet�
⇒ Switch the unit on at the mains power switch (16)�
4.3

Remove Shipping Restraint

The shipping restraint must be removed before the unit may be
operated:
⇒ The unit has been connected and switched on as described in
Section 4�2�
⇒ Close the unit cover (8, Fig� 1)�
⇒ Press the retract key (4)�
♦ The pressure discs (9, Fig� 1) retract to their home position
where they stop�
⇒ Open the unit cover�
⇒ Remove the shipping restraint (23)�
The unit is now ready for use�
- 6 -
16 18
Fig. 2
4
Fig. 3
23
Fig. 4