Symbol Explanation - SMA DATA MANAGER M Instrucciones Breves

3 Symbols on the Product
DHCP Server is recommended.
The DCHP server automatically assigns the
appropriate network settings to your nodes in the
local network. A manual network configuration is
therefore not necessary. In a local network, the
Internet router is usually the DHCP server. If the IP
addresses in the local network are to be assigned
dynamically, DHCP must be activated in the Internet
router (see the Internet router manual). In order to
receive the same IP address by the internet router
after a restart, set the MAC address binding.
In networks where no DHCP server is active, proper
IP addresses must be assigned from the free address
pool of the network segment to all network
participants to be integrated during commissioning.
IP addresses of Modbus devices
In systems with Modbus devices, static IP addresses
must be assigned to all Modbus devices. Suitable IP
addresses can be assigned to the Modbus devices
from the free address supply of the network segment
either manually or dynamically via DHCP.
If the IP addresses are to be assigned dynamically,
DHCP must be activated in the router (see the router
manual). Make sure that the Modbus devices do not
contain variable IP addresses but always the same
IP addresses.
This also applies to data managers that are used as
subordinated devices (slaves).
3 Symbols on the Product

Symbol Explanation

USB
Function button
System LED
Ethernet
WEEE designation
Do not dispose of the product together
with the household waste but in accor-
dance with the disposal regulations for
electronic waste applicable at the instal-
lation site.
The product is suitable for indoor instal-
lation.
6 EDMM-10-IS-xx-15
SMA Solar Technology AG
Symbol Explanation
CE marking
The product complies with the require-
ments of the applicable EU directives.
RoHS labeling
The product complies with the require-
RoHS
ments of the applicable EU directives.
FCC designation
The product complies with the require-
ments of the applicable FCC standards.
RCM (Regulatory Compliance Mark)
The product complies with the require-
ments of the applicable Australian stan-
dards.
This equipment contains specified radio
equipment that has been certified to the
Technical Regulation Conformity Certifi-
cation under the Radio Law.
ICASA
The product complies with the require-
ments of the South African standards for
telecommunication.
ANATEL
The product complies with the require-
ments of the Brazilian standards for
telecommunication.
Este equipamento opera em caráter se-
cundário, isto é, não tem direito a pro-
teção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e
não pode causar interferência a sis-
temas operando em caráter primário.
The product complies with the Moroccan
safety and EMC requirements for elec-
tronic products.
Quick Reference Guide