Assembly - Hanging the Fan (continued)
9
Mounting the fan
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
□
Align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots, and turn clockwise to lock the canopy (C) in place.
□
Firmly tighten the two mounting screws.
□
Install the remaining two mounting screws into the holes in
the canopy (C) and tighten firmly.
□
Install the decorative canopy ring by aligning the ring's
slots with the screws in the canopy (C). Rotate the ring
counter-clockwise to lock in place.
Assembly - Attaching the Fan Blades
10
Attaching the fan blades
NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates your decor.
□
Attach the blade (G) to the fan motor housing (D) by inserting the blade (G) into the slot in the side of the fan motor housing (D) and
secure using the blade attachment screws (AA) provided as shown. Start a screw (AA) into the bracket. Repeat for the two remaining
screws.
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades (G).
D
G
AA
10
A
C