Description And Technical Specifications; Dimensions - FAAC 739 Serie Manual Del Usuario

These instructions apply to the following models:
FAAC 739
The 739 gearmotor is an electro-mechanical operator designed for moving
sliding gates.
The non-reversing reduction system ensures the gate is mechanically locked
when the gearmotor is not operating, therefore it is not necessary to install
any electric lock.
Power supply (+6% -10%)
Absorbed power (W)
Absorbed current (A)
Thrust capacitor (µF)
Thrust on pinion (daN)
Torque (Nm)
Temperature protection (°C)
Max leaf weight (Kg)
Type of pinion gear
Gate speed (m/min)
Max. gate length (m)
Type of travel-limit device
Type of clutch
Use frequency
Operating ambient temperature (°C)
Weight of gearmotor (Kg)
Protection class
Operator dimensions
AUTOMATED SYSTEM 739

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS

MODEL

2. DIMENSIONS

A convenient manual release with customised key makes it possible to move
the gate in the event of a power failure or malfunction of the operator.
The 739 gearmotor was designed and built for controlling vehicle
access. AVOID ANY OTHER USE WHATEVER.
739 230V
230V~ 50Hz
350
1.5
10
45
18
140
500
Z16
12
15
Mechanical
Electronic
S3 - 30%
-20 ÷ +55
10
IP44
See Fig.2
8
Motor lid Motor lid
Electronic control unit Electronic control unit
Release device Release device
Gearmotor body Gearmotor body
Foundation plate Foundation plate
Pinion Pinion
Limit switch Limit switch
Motor cover Motor cover
Capacitor (for 739 230V only) Capacitor (for 739 230V only)
Protective side panels Protective side panels
Toroidal transformer (for 739 24V only) Toroidal transformer (for 739 24V only)
Encoder (for 739 24V only) * Encoder (for 739 24V only) *
Battery (for 739 24V only) * Battery (for 739 24V only) *
* optional * optional
739 24V
230/115V~ 50/60Hz
70
3
-
40
13.5
-
400
Z16
12
15
Mechanical
Electronic
100%
-20 ÷ +55
8.5
IP44
See Fig.2
Values are expressed in mm. Values are expressed in mm.
Fig. 1 Fig. 1
Fig. 2 Fig. 2