BIG ASS FANS HAIKU Guia De Instalacion página 12

Install Mounting Ball
7
Slide the mounting ball over the extension tube (Fig. 7.1).
Insert the 6 mm steel pin into the hole at the top of the extension tube, and then slide the mounting ball upward, seating the steel pin in
the inner slots (Fig. 7.2).
Insert the wedge into the mounting ball and secure it with the screw. Tighten the screw enough to prevent movement between the
mounting ball and extension tube, but do not over-tighten (Fig. 7.3).
Fig. 7.1
Mounting
Ball
Extension Extension
Tube Tube
10
Fig. 7.2
6 mm Steel Pin
Fig. 7.3
Screw
Wedge
HAIKU® BY BIG ASS FANS | REV. D | 10/12/2020