Cosina CS-2 Folleto De Instrucciones página 15

PHOTOGRAPHING WITH
AUTO-WIN DER
Your CS-2 is designed to be coupled with
Cosina Auto-winder which enables you to take
approximately 2 frames per second at the
maximum shutter speed . The auto-winder is
powered by 4 pcs. of readily available AA size
al kali ne battery.
To photograph with the winder:
1. Couple the w·inder with the camera body.
(Fig.13)
2. Tighten the screw . (Fig.14)
3. Set the switch to "ON" position . The
winder advances the film, if previously not
wou nd .
4. Set the exposure and locus.
5 . Depress the release button lully to activate
the shutter. The winder will immediately
start advancing the film. At this moment if
you release your linger from the release
button, only a single shot is made. If you
keep depressing it, continuous shots at a
rate of 2 frames per second can be made .
6 . When you have finished exposing the last
frame in your film cassette, take procedure
as described in "REMOVING FILM" . You
need not remove the winder from camera
body when removing film.
NOTE: Set the switch at "OFF" position when
the winder is not in use.
Fig.13
•
~ -
'
,
..
)
Fig 14
14