KTM Power Parts 64112964044 Manual Del Usuario página 9

Scope of supply
1x heated grip, left
1x heated grip, right
1x heated grip, control unit
1x upper bracket
1x lower bracket
2x screw M5x15
2x circlip
1x rubber protector
1x double-sided adhesive tape
2x cable tie
Mounting heated grip
- Switch off the ignition system.
- Remove screws .
- Completely unscrew adjusting screw
NOTE
The adjusting screw is fastened to the headlight mask by a ball head
holder.
Do not pull the adjusting screw out of the ball head holder.
- Swivel the headlight mask slightly forwards and disconnect socket
connector .
- Remove the headlight.
- Remove screws .
- Remove screws .
- Remove screws .
.
9