Home Decorators Collection 51890 Guía De Uso Y Cuidado página 10

Assembly - Hanging the Fan (continued)
5
Wrapping the extra wire
NOTE: Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan.
□
Gently wrap the excess wire around the mounting bracket.
□
Secure with electrical tape.
6
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the ceiling fan (C) with the two screws
in the mounting bracket (A). Push up to engage the slots and
turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (FF).
□
Install the two mounting screws (saved from Assembly step 1
"Preparing for mounting") into the holes in the canopy (C) and
tighten firmly.
□
Install the decorative canopy ring (HH) by aligning the ring's slots
with the screws in the canopy (C). Rotate the ring clockwise to
lock in place.
FF
10
A
C
HH
D
E