Using Your Ceiling Fan - Emerson CF610VNB00 Manual Del Usuario

BP7495 CF610 Welland.qxp_ BP7495 3/10/15 4:21 PM Page 17
6.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
All fans are shipped from the factory with the reversing
switch positioned to the "left" circulate air downward.
If airflow is desired in opposite direction, turn your fan
OFF and wait for the blades to stop turning, then slide
the reversing switch to the "right" position, and turn fan
on again (Figure 27).
The fan blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
6.2
Check the operation of the fan by gently pulling on the
pull chain switch.
Cut the 3-speed switch pull chain to a desired length
(optional). Connect the wood pendant (supplied) to the
3-speed switch pull chain by sliding the wooden
pendant (small hole first) onto the pull chain
(Figure 28). Attach the chain coupler to the end of the
chain and allow the wooden pendant to fall down over
the coupling.
Your fan model is equipped with a 4-position,
3-speed pull chain switch (Figure 28). The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF

6. Using Your Ceiling Fan

Switch Position
Left
Right
17
SWITCH
HOUSING
ASSEMBLY
Figure 27
WARNING
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
3-SPEED
CHAIN COUPLER
SWITCH
PULL CHAIN
WOODEN PENDANT
Figure 28
Please contact 1-800-654-3545 for further assistance
REVERSING
SWITCH
SWITCH
HOUSING
ASSEMBLY
emersonfans.com
E.T.L. Model No.: CF610