Disposal; Ec Declaration Of Conformity; General Power Tool Safety Warnings; Introduction - Stihl HSA 94 R Manual De Instrucciones

20 Disposal

Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20 Disposal
20.1 Hedge Trimmer
Contact your STIHL servicing dealer for informa‐
tion on disposal.
► Dispose of the hedge trimmer, accessories
and packaging in accordance with local regu‐
lations and environmental requirements.
21 EC Declaration of Con‐
formity
21.1 Hedge trimmer STIHL
HSA 94 R, HSA 94 T
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
– Category: Cordless hedge trimmer
– Manufacturer's brand: STIHL
– Models: HSA 94 R, HSA 94 T
– Serial number: 4869
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014-1, EN 55014-2, EN 62841-1 and
EN 62841-4-2.
Applied conformity assessment procedure in
accordance with Directive 2000/14/EC, Annex V.
HSA 94 R, cutting length 600 mm
– Measured sound power level: 94 dB(A)
– Guaranteed sound power level: 96 dB(A)
HSA 94 R, cutting length 750 mm
– Measured sound power level: 95 dB(A)
– Guaranteed sound power level: 97 dB(A)
HSA 94 T, cutting length 600 mm
– Measured sound power level: 95 dB(A)
– Guaranteed sound power level: 97 dB(A)
HSA 94 T, cutting length 750 mm
– Measured sound power level: 96 dB(A)
– Guaranteed sound power level: 98 dB(A)
0458-005-9821-B
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are applied to the pruning
shears.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
22 General Power Tool Safety
Warnings
22.1

Introduction

This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under "Electrical Safety"
do not apply to STIHL cordless products.
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
22.2

Work area safety

a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam‐
mable liquids, gases or dust. Power tools cre‐
ate sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
English
35