Connections To Be Made - Axxess TYTO-02 Instrucciones De Instalación

Applications
ToyoTa
Avalon
(with NAV)
Camry
(with NAV)
Highlander
Prius 3rd gen.
(with NAV)
Prius PHV
(with NAV)
Prius V
Rav-4
Sequoia (
with NAV)
Tacoma
(with NAV)
Tundra
(with NAV)
Venza
(with NAV and without separate display)
From the 16-pin harness, to the aftermarket radio:
2013-up
• Connect the White wire to the left front positive speaker output.
2012-up
• Connect the White/Black wire to the left front negative speaker output.
2014-up
• Connect the Gray wire to the right front positive speaker output.
2012-up
• Connect the Gray/Black wire to the right front negative speaker output.
2012-up
2013-up
• Connect the Green wire to the radio's left rear positive speaker output.
2015-up
• Connect the Green/Black wire to the radio's left rear negative speaker output.
2013-up
• Connect the Purple wire to the radio's right rear positive speaker output.
2012-up
• Connect the Purple/Black wire to the radio's right rear negative speaker output.
2014-up
2013-up
• Connect the Blue/White wire to the amp turn on wire.
The following wires on the 16-pin harness will not be used, tape up and disregard:
• Red, Brown, Light Green, Blue/Pink, Green/Purple, orange/White.
• Connect the 16-pin harness to the TYTO-02.
TYTO-02

Connections to be made

2