Storage; Cleaning And Disinfecting The Wet/Dry Vac; Casters - RIDGID WD06700 Manual Del Usuario

SP6737-1 Ridgid 7/26/10
Maintenance (continued)
Cleaning and Disinfecting the
Wet/Dry Vac
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
To clean the drum:
1. Dump debris out.
2. Wash drum thoroughly with warm
water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
(i.e.; waste water pick up) the drum
should be disinfected.
To disinfect the drum:
1. Pour 1 gallon of water and 1 teaspoon
chlorine bleach into the drum.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the drum.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the drum.
3:33 PM Page 11

Storage

Before storing your Vac, the dust drum
should be emptied and cleaned. The cord
should be wrapped around the unit.
Accessories should be kept in the same
area as the Vac so they can be readily
available. The Vac should be stored
indoors.
If the power cord is damaged, it must be
replaced by the manufacturer or their
service agent or by similarly qualified
personnel to reduce the risk of accident.
Power
Cord

Casters

If your casters are noisy, you may put a
drop of oil on the roller shaft to make
them quieter.
11