Power Consumption - vitapur VWD2266W Manual D Uso Y Cuidado

IMPORTANT:
To avoid water overflow while cleaning the dispenser, always remove the bottle
support collar before pouring water or cleaning solution into the reservoir
(see Figure A on pg. 3).
5.
Press both dispensing buttons until water no longer comes out.
6.
Drain the reservoirs.
IMPORTANT:
Collect the water into a container, not the drip tray.
7.
Rinse with clean water.
8.
Replace the bottle support collar and the water bottle (see Installing the Water Bottle).
IMPORTANT:
Drain approximately 4 glasses of water from each tap before initial use. This
does not need to be done with replacement bottles.
Going Away on Vacation
When not using the dispenser for long periods of time or when going on vacation, conserve
energy, unplug the dispenser and drain the reservoirs (see Draining the Reservoirs). Follow
Initial Product Cleaning Procedures upon return and startup of the dispenser.
VWD2266W
Heating Temp (approx.):
Cooling Temp (approx.):

Power Consumption:

Hot
545 W
194°F / 90°C
46°F / 8°C
Cold
88 W