Cafe CVM919 Manual Del Usuario página 24

Other Features
Chef Connect
Use the Chef Connect feature for connecting your
microwave to a Café range to sync your vent fan, cooktop
surface lights and clock via Bluetooth technology.
1. You must have a Chef Connect enabled range. To
pair your microwave for the first time, initiate the Chef
Connect process on the Café range. Refer to the
range owner's manual for instructions
2. On the microwave, hold Chef Connect button for 3
seconds. The Bluetooth icon
flashing as the microwave starts to search and pair
with your Café range. The icon
pairing successfully.
If a Café range is not found within 2 minutes during
search mode the microwave will stop searching and
the Bluetooth icon will turn OFF.
On initial setup, the setup protocol will start.
If the Chef Connect feature is enabled the default
settings are as follows:
- Display clock sync: ON
- Auto cooktop light: ON (HIGH setting)
- Auto vent fan: OFF
- Auto off: 15 minutes
3. Select 3 to sync the surface lights to your Café range.
It allows the microwave surface lights to turn on
at HIGH/LOW level automatically when the paired
range's cooktop burner turns on.
49-7000065 Rev. 0
on the display will start
will remain ON after
4. Select 4 to sync the vent fan to your Café range. This
allows the microwave vent fan to turn on at LOW/
MIDIUM/HIGH/BOOST speed automatically when the
paired range's cooktop burner turns on.
Pairing is now complete, the Chef Connect feature is
now on.
NOTE: If there is no sync option selected during
set up, 5 minutes after icon
return to stand-by mode.
After completing the setting per above steps, your
microwaves vent fan and cooktop light will be set
to turn on automatically when the cooktop burner is
turned on. The cooktop and range clock display will
be synced to display the same time. The vent fan and
cooktop light will be set to automatically turn off 15
minutes after the cooktop burner is turned off.
If desired, the light, fan, and auto off settings can
now be changed using settings options 3, 4, and 5,
respectively.
Press Chef Connect once to turn off and twice to
re-connect. The icon
In the case of an unintended disconnect such as lost
power to the microwave or range the connection will
remain after power resumed. For very short power
interruptions, the power may need to be reset in order
to reconnect
Chef
Connect
Hold 3 Sec
turns on, the units will
will illuminate when on.
23