Heating cannot be adjusted.
• Defective energy regulator.
16 REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS.
• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• After replacing a gas system component, check for gas leaks
at connection points.
• After replacing an electrical system component, check it is
correctly wired.
GAS GRILL
Replacing the gas tap.
• Remove the grease collection drawer.
• Remove the control knob.
• Remove the front panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the pilot burner and thermocouple.
• Remove the grease collection drawer.
• Remove the control knob.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the main burner.
• Remove the grease collection drawer.
• Remove the control knob.
• Remove the bottom front panel.
• Remove the control panel.
• Remove the splashguard, the grilles, the tiles, the front tile
support and the burner guard.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
GAS LAVA STONE GRILL
Replacing the gas tap.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the pilot burner and thermocouple.
• Remove the control panel.
• Remove the grilles, lava stone and support brazier.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the main burner.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC GRILL
Replacing the knob and indicator light.
• Remove the grease collection drawer.
• Remove the control knob.
• Remove the bottom front panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the elements.
• Remove the grease collection drawer.
• Remove the control panel.
• Remove the splashguard and the grille.
• Remove the box and the cover of the element terminals by
unscrewing the self-tapping screws from the top of the ap-
pliance.
• Remove the component from above and replace it.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Working thermostat replacement
• Remove the grease collection drawer.
• Remove the control knob.
• Remove the bottom control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC GRILL (TILT UP HEATING ELEMENTS)
Replacing the energy regulator and the indicator light
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the elements.
• To take the heating unit out of the tank, lift it up and turn it
using the lifting handle until it remains hooked up.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
17 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
GAS GRILL
• Gas tap
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
GAS LAVA STONE GRILL
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
• Gas tap
• Brazier
• Volcanic lava stone
ELECTRIC GRILL
• Working thermostat
11