Validation Process
1. Press ----- ECU VIEW
2. Toggle down and highlight ----- TIPM/FCMCGW CENTRAL
3. Press ----- MORE OPTIONS
4. Press ----- ECU DETAILS
5. Press ----- CONFIG INFO
6. Toggle down, verify:
Name
REMOTE START PRESENT
Disconnect Ground From Battery
1. Remove ground from battery
a. Using a 10 mm socket, remove the negative battery cable.
Hood Switch Bracket Installation
1. Mount the hood switch bracket
a. Locate the hood switch mounting location, near the battery on
the driver's side fender.
b. Using the provided rivits, secure the hood switch bracket to
the driver's fender.
Note: Loosening or removal of the battery may be necessary.
GATEWAY
Installation Procedure:
5 of 11
Value
SET