Solid Top Gas Hob/Simple Service; Gas Oven; Electric Hob; Electric Oven - ALI PCGV92Q Instrucciones Para Instalación, Uso Y Mantenimiento

SOLID TOP GAS HOB/SIMPLE SERVICE

The pilot burner does not light
Possible causes:
• Insufficient gas supply pressure.
• Blocked tubing or nozzle.
• Defective gas tap or valve.
• Igniter defective or not properly connected.
• Igniter or igniter wire defective.
Pilot burner goes out during use
Possible causes:
• Insufficient gas supply pressure.
• Defective gas tap or valve.
• Defective thermocouple or insufficient heating.
• Thermocouple incorrectly connected to gas tap or valve.
• Knob of gas tap or valve not pressed sufficiently.
The main burner does not light ( even though pilot is lit )
Possible causes:
• Insufficient gas supply pressure.
• Blocked tubing or nozzle.
• Defective gas tap or valve.
• Defective burner ( gas outlet holes clogged ).

GAS OVEN

The pilot burner does not light
Possible causes:
• Insufficient gas supply pressure.
• Blocked tubing or nozzle.
• Defective gas tap or valve.
• Igniter defective or not properly connected.
• Igniter or igniter wire defective.
Pilot burner goes out during use
Possible causes:
• Insufficient gas supply pressure.
• Defective gas tap or valve.
• Defective thermocouple or insufficient heating.
• Thermocouple incorrectly connected to gas tap or valve.
• Knob of gas tap or valve not pressed sufficiently.
The main burner does not light ( even though pilot is lit )
Possible causes:
• Insufficient gas supply pressure.
• Blocked tubing or nozzle.
• Defective gas tap or valve.
• Defective burner ( gas outlet holes clogged ).
Heating cannot be adjusted.
Possible causes:
• Defective gas valve.

ELECTRIC HOB

The hotplate does not heat.
Possible causes:
• Hotplate defective.

ELECTRIC OVEN

The appliance does not heat.
Possible causes:
• Temperature thermostat defective.
• Heating elements defective.
• Safety thermostat tripped.
Heating cannot be adjusted.
Possible causes:
• Temperature thermostat defective.

GRILL

The grill does not switch on
Possible causes:
• Defective Control knob .
• Le resistenze sono guaste.

16 REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPONENTS.

• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• After replacing a gas system component, check for gas leaks
at connection points.
• After replacing an electrical system component, check it is
correctly wired.

GAS HOB

Replacing the gas tap.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the pilot burner and thermocouple.
• Remove the control panel.
• Remove the panstand grids and burners
Remove the pilot burner protection.
• Remove the 2 screws securing the pilot burner to the hob
and pull the pilot burner out by approx. 10 cm.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
SOLID TOP GAS HOB/SIMPLE SERVICE
Replacing the gas tap and piezo igniter
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the main burner, pilot burner, thermocouple and
igniter.
• Remove the hotplate.
• Remove the control panel and internal guards.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
11